Shower Redefined

Redefine your Shower Experience

Blog

How Do Dual Flush Toilets Work

By

how do dual flush toilet workDual flush toilets are widely used all around the world. It’s most likely that you have already seen one but you didn’t pay attention. But did you know how do dual flush toilets work in reality?

You will know once you use the dual flush toilet. Usually two buttons confuse people when they try to flush the toilet.

They’re very similar to the traditional toilets that we use on daily basis. However, they’re more efficient and useful. Especially in the locations around the world where there is lack of water.

We don’t think about such simple yet very useful things. We depend on our toilets, but what would happen if we didn’t have so much water to flush it even when it’s necessary?

What Are Dual Flush Toilets?

Dual flush toilets are very similar to traditional single toilets. However, they differ in one thing the most.

The difference between dual flush toilets and single flush toilets is simple. It’s the way they use water to dispose of human waste.

Dual flush toilets flush human waste differently. It depends if you’re flushing liquid or not. Dual flush toilets give the ability to the user to choose which way he would like to flush the toilet after the use.

They’re very useful in parts of the world where the water is in short supply. With dual flush toilets, you will be using less water to dispose of human liquid waste.

That way, not only you will save money on your water bill, but you will also save the water from over excessive use.

While there are many benefits of dual flush toilets, there are also some cons. Just like for any other product out there.

I am 100% sure that you have already seen a dual flush toilet, but you just haven’t recognized it back then. It might be confusing when you see it at first. However, once you know the use of it – everything becomes clear.

They can often be seen in hotels, which is a great way for the hotel to save water.

What’s The Difference Between Dual Flush Toilet and Traditional Toilet?

The difference between single and dual toilets is inside the water tank.

Transformation

You can easily transform any toilet from traditional toilet. Simply by replacing the water tank. Difference between dual flush and single flush toilets can be seen a little bit on the outside.How Do Dual Flush Toilets Work

Difference

Dual flush toilets are a little bit smaller in dimension and design. That means that they’re holding less water than single flush toilets.

The biggest difference is in the back of a toilet. Dual flush toilets have a large trap way and improved flushing system. It easily cleans all human waste down the drain easily.

Another difference can be seen in the water consumption, especially at the end of a month. Water price can be drastically reduced. Getting a dual flush toilet will help you save water and money.

There is also a difference in the way they flush the human waste down the drain as well.

How Do Dual Flush Toilets Work?

Traditional toilets use tube as a way of removing waste from the toilet bowl. Dual flush toilets use the different technique.

Traditional toilets work on the simple principle. When there is a lot of water in the toilet bowl, tube activates and disposes of waste. Therefore, a large volume of water is necessary so the human waste is pulled down the toilet bowl tube.

Technique

On the other hand, dual flush toilets use a different technique. They have a larger hole at the bottom of the tube which is located in the toilet bowl. There’s one another unique thing about dual flush toilets. It is their way of pulling the waste down the toilet bowl as well. They have removed tube action, so, therefore, there is no need for a large volume of water.

Water saving

Dual flush toilets use less water per each flush. They also let users of the toilet choose between two flush modes. They save water three times more than single flush toilets. Approximately, 68% of water can be saved by using dual flush toilets.

Money Saving

That definitely makes a significant difference on your water bill.

How It Works

Since there is a larger hole at the bottom of the toilet bowl. There is no tube action so toilet gets less clogged with dual flush toilets. By using the dual flush toilet, you will forget about your plunge. Also, you will forget about increasing the toilet flush power as well.

However, the only thing you will use more than plunger is the toilet brush. Water won’t be able to dispose of human waste if there’s no enough water.

Installation of the dual flush toilet isn’t different or harder than a single flush toilet. But the results are rewarding.

Will Dual Flush Toilets Be Used All Around The World?

Dual flush toilets are more common than pressure assist toilets. They are used all around the world. It’s most likely that you have already come across one dual flush toilet.

They can often be seen in hotels where dual flush toilets are made to save up to 60% water than single flush toilets.

However, dual flush toilets are a little bit more expensive than single flush toilets. In my opinion, they’re totally worth it. Even although they’re expensive, you will be able to save more money. Especially on your water bill. It also do good for the environment and the world.

Conclusion

I hope that you have found everything you were looking for this post.

Dual flush toilets are still simple, yet improved version of single flush toilets.

They won’t only help you save water and money, but they will also help to prevent your toilet from clogging. However, that doesn’t mean you should flush everything down the drain.

What do you think about dual flush toilets? Did you come across any yet? Will you embrace them in the future?

What are Toilets Made of

By

what are toilets made ofWhat are toilets made of?Does this question ever come to your mind. Most of the time, we use toilets without giving it a second thought. We use them on a daily basis without ever thinking about them. Sometimes, we even feel lazy to give them long needed cleaning.

However, it’s not a bad thing to wonder how toilets work. Also what are they made of? Especially if you are a plumber. It’s something you should know the best.

Toilets consist of many parts, yet are simple and the most efficient way to dispose of human waste. Materials have definitely changed through the history. But parts have stayed almost as important as they were before.

If you have ever wondered form what materials were toilets made, there’s nothing wrong with it.

Parts of Toilets

Toilets might seem complicated. However, they are some basic parts. These make the whole system work together.

The main parts of every toilet are:

  • Bowl
  • Water tank
  • Flush mechanism

Of course, there are also other parts such as valves, water source, and others. However, these three make toilet complete. They’re the most basic and important parts of every toilet.

While some toilets might differ from home to home, or even from other countries. It’s still running on the same principle. The main goal of the toilet is always the same and it will never be changed.

Toilet can’t function without even a single part missing. The debate in question what is the most important part of the toilet can never be solved.

If you had a toilet without the water tank and its flush mechanism. You could still pour the gallons of water manually and use the bowl as dispose of human waste.

Parts of toilet haven’t changed dramatically even from the earlier stages. We have upgraded toilet and set it to be more automated, however, we use it the same way our ancient ancestry have used it.

Don’t think that toilet is complicated. They’re equipped with basic parts that make the system automated.

Materials Used to Make Toilets

If you have been wondering what materials are used to make toilets, the answer might be long.

Each part of the toilet almost always comes from different material. Materials play a huge role when it comes to the toilets.

Flush Mechanism

The flush mechanism located inside the toilet water tank is always inside the water. Therefore, the materials used to make the inner mechanism of toilet water tank are supposed to be durable, and reliable. Even when they’re in the water. Also, they need to be light to make the movement in the water easier.

If not, the mechanism might not function properly. Or it just wouldn’t last long enough.

Toilet Bowl

While many people think that the toilet bowl is created from ceramic – that’s not true. The toilet bowl is made from a more complex material. It is from special clay called vitreous china. The shiny glaze that is applied as finish might make people think that it’s a normal ceramic.

Water Tank

The water tank is created of hard plastic or PVC. Inner mechanism parts are made of a lightweight hard plastic that is waterproof.

Toilet Seat

The only part of the toilet that is made from different materials is the toilet seat. It’s replaceable. There are many different materials used. For example; wood, plastic, and many others.

Facts You Didn’t Know About Toilets

To many people, the toilet is just a toilet. Something they use whenever they need to and don’t think about it ever again.

Toilet paper is also something we never paid a second thought to either. By rumors, toilet paper did come from China. The thing is that a single sheet was 2 feet by 3 feet. We still don’t know why, and which material is used. However, it’s something that we managed to deal with.

Toilets can also be dangerous. Approximately 40,000 of people in the United States somehow hurt themselves in the toilet. The more shocking fact is that King George II died after falling off one toilet back in 1760. You should be careful.

If you have a baby, or you are planning to make one, check this out. You will approximately change your baby’s diaper around 10,000 times before your child gets used to the toilet.

In South Korea, there is a park and museum which is dedicated to the toilets. Ever wondered what are the top 10 toilets in the world? I didn’t either.

Differences Between Toilets and Materials

All the way from ancient age and our ancient ancestry, things have definitely changed. However, no major changes were made.

First toilets didn’t have flushing system, yet had only a toilet bowl for use. We can say that we have automated the system.

However, toilets can differ from country to country. They especially differ from continent to continent. In some countries such as France, you can see popular bidets. They have been created as an addition to the toilets. Also that automates the process of our toilet usage even more.

While, on the other than, in some countries such as Japan, you will find high-end technology toilets. Their toilets can cost up to $10,000! They come with bidet included in the toilet. Also, they have remote controllers which let you choose the water pressure or flushing sound.

Therefore, we can witness different materials used to make the toilets. Toilets always work on the same principle, and they always will. History provides us with the statistics that prove that theory.

Conclusion

Toilets can vary in the materials, parts, and many other ways. However, they always work on the same principle that ages a long time ago.

It’s not a bad thing to pay attention to the toilets. Also, being for everything we have developed to accommodate our needs.

Hopefully, in this post, you have learned the basic parts of every toilet. You have also learned how they work, what are they made of. There were also even some interesting facts.

Also, learning how to fix the toilets is also interesting, and can come in handy at most times.

 

How to Get More Water in Toilet Bowl

By

how to get more water in the toilet bowlHave you ever found yourself in a situation where you needed to flush twice? What if you could get more water in your toilet and solve your problem for good? Keep reading to learn how to get more water in toilet bowl.

Toilets are all made on the same principle. However, most of them differ from each other. The reason for that is because manufacturers might produce the same toilet parts in a different way. That is some kind of their signature, but also a possible improvement.

Therefore, toilets come in different sizes. The size of toilet matters most of the time when it comes to the water capacity.

Why Would You Need More Water in Toilet Bowl?

Everyone who understands how toilet works will know the answer.

If you try and pour the cup of water in the toilet bowl. You will notice that nothing happened and nothing has changed. But if you pour a gallon of water in the toilet bowl, you will notice that the water is flushed down the toilet bowl.

The reason for that is simple. Because toilet bowl has disposal system that it flushes the toilet only if a lot of water is dropped into the bowl. Such system is made so that water doesn’t get disposed constantly. When we urinate in the toilet bowl, for example.

Bigger toilet bowls require more water for each disposes of human waste. More water means bigger water tanks. If you didn’t know, there are different dimensions of water tanks. When you are going to purchase new water tank for your toilet. You should approximately know which toilet tank dimension would work the best for you.

Is Getting More Water in Toilet Bowl Safe?

Most people worry about their toilets, and it’s normal to ask yourself such question.

Getting more water in the toilet bowl shouldn’t cause any problems. Even if you pour more water than the toilet bowl can handle it, there still won’t be any damage done.

Have ever experienced toilet jam? where water which is disposed of in the toilet water can’t go through. You would have noticed that the water still doesn’t spill into your toilet floor.

The toilet bowl has developed a specific way where water will never be able to overspill. If you wondered where the excess water goes when the toilet bowl is full of water. The answer would be the jets under the toilet rim.

No matter how much water gets into the toilet bowl. There’s no way that the bowl system will get damaged in any way. Even if you have the smallest toilet bowl out there, there is nothing to worry about.

We might be using the toilet on the same principle our ancestors did. But we have developed such useful features that improve the usage of our modern toilets nowadays.

How to Get More Water in Toilet Bowl?

Getting more water in the toilet bowl can sometimes be simple. But other times might require more effort.

Step 1 – Check the water level

The first step would be to open the toilet tank and check how much water is in there actually. When you buy a new toilet water tank and you set it up. You will get to choose the water level.

Water level means how much water will be refilled into the water tank for another use. Most of the time, our water tanks are set to the medium or even low water level.

Step 2 – Find the level setting

It’s always located inside the water tank. Most of the time on the left side.

Every water tank is different. But almost every water tank will have a place in the mechanism which will let you choose the water level. The water level is also known as water capacity each water tank can handle.

Step 3 – Switch the level

If you found the leveler, it’s time to switch it. Switching it to higher setting. It will allow you to get more water in the toilet bowl through water tank.

Keep in mind every water tank has its capacity.

When you switch the setting of the water tank. You will notice that refilling the water into the tank requires a little bit more time. However, flushing the water in the toilet will last longer and be stronger as well.

You can find out more in the below video

Step 4 – Enjoy more water in the toilet bowl

After switching the setting of the water tank, you are able to get more water in the toilet bowl. But only the amount that the setting allows you. Limits are there for a reason.

There is no other way to get more water in the toilet bowl. Reason is that water tank is the place where the water comes from. You’re limited to the highest water capacity of your water tank. However, if that’s not enough, you can always purchase a bigger water tank.

When purchasing bigger water tank, it’s important to make sure it fits in your bathroom as well. Also, whether it’s a water tank that gets placed on the wall, or behind the toilet bowl.

Tips to Prevent Water Tank Overfilling

Water tank gives you the ability to change the water capacity. However, it’s important that you don’t mess anything other inside.

Inside water tank, you will also find the mechanism that keeps the level of water always the same. Usually, there is an air ball, similar to the balloon which moves up as the water fills in the water tank. When the ball reaches its maximum level, the bar it’s attached to closes the water valve.

If you remove the ball, or try and change the system. You would receive even more water in the tank. You might expect it to overfill with water.

I highly recommend you to deal with the allowed water capacity level. And don’t do anything else to the system. If you feel like you need more water, just get a larger water tank.

Conclusion

You shouldn’t feel bad asking how to get more water in the the toilet bowl.

Getting more water in your tank is something that has even been thought by manufacturers. That’s why almost every water tank comes with the possibility to choose water capacity.

Although, keep this in mind. Higher water capacity will require more time for refilling. When flushing water into the toilet.

Also, more water means that you will spend more water in a long run. If you get surprised by the water bill change, that’s due to the water tank.

Although, you shouldn’t sweat it. If it’s something you necessarily need, go for it. However, if your toilet bowl doesn’t require that much water – simply leave it on default. Or in the middle water capacity level.

 

 

How to Clean The Toilet With Vinegar

By

How to Clean The Toilet With VinegarChoosing the right cleaning products for the toilet can be tough. There are many commercials that promise a lot. We simply have to decide between bunches of different products on the market without even knowing whether they will work as promised.

Cleaning the toilet efficiently shouldn’t cost a lot of money. Have you heard about most common methods which date from a long time ago? Vinegar is one solution which will help you to clean your toilet. It works as efficiently, or even better, without having to pay for expensive cleaning products.

Vinegar is also a natural-based ingredient. It doesn’t consist any chemicals that might be dangerous for the environment.

Does Cleaning Toilet With Vinegar Actually Works?

Many people questioned whether vinegar can actually help you in cleaning your toilet. Some of the people can’t believe that vinegar can actually replace the cleaning products.

Vinegar won’t only help you clean your toilet. But it’s also a great ingredient to fight with the stubborn water stains in your toilet. After finding out that vinegar actually works, people immediately change the question. From does cleaning toilet with vinegar works to how to clean the toilet with vinegar.

With vinegar which is usually 5% solution, you will be able to kill and remove germs. Just like you would with any toilet cleaning product purchased from the store.

There are many benefits that people don’t even understand. Blindly buying the toilet cleaning products is bad. Just because they’re made for them doesn’t necessarily means that it’s the best thing to do.

If you are in doubt, I am sure that at the end of this post, you will realize the power of vinegar. Even you might decide to give a vinegar try and let it show you its ability in cleaning your toilet.

How Can Vinegar Help Clean Your Toilet?

As mentioned above, vinegar is as good as any toilet cleaning product on the market. It will clean and remove bacteria and germs as well as any commercial product would.

Other than cleaning and removing germs, vinegar is also good at fighting stubborn stains. They appear over a longer period of time. To avoid such stains, you should clean your toilet regularly. You should clean your toilet at least once per week for the best results.

Vinegar doesn’t only kill germs, bacteria, and removes stains. It is also good for removing mold as well. The reason for that is because it’s not like other commercial cleaning products. Vinegar isn’t chemical, yet it’s an acid.

Therefore, vinegar is also a natural lime remover as well. While commercial toilet cleaning products are unhealthy and harmful. Vinegar is safe.

Vinegar has a strong smell which can be overwhelming for senses. However, once you get used to it, you will never want to go back to use the chemical toilet products anymore.

There are even experiments where YouTubers would pour one gallon of white vinegar in the toilet. They would also record the immediate results. Vinegar also can be used as a quick cleaner for your toilet rim as well.

How to Clean The Toilet With Vinegar?

When cleaning your toilet for the first time with vinegar, it’s important to take care of your safety.

Cleaning gloves are must, and even eye protection or nose mask is good to have. Nose mask is especially good if you can’t handle the strong scent of vinegar.

After that, it’s important to have a plan and order in which you will clean your toilet. It’s important not to skip anything. But it’s also important to have a good cleaning plan. It will make your cleaning more effortless, and time-saving.

Step 1 – Clean the Water Tank

The first thing you should clean would be the water tank. Inside water tank, you will find calcium, lime, and other minerals that can be found in tap water. The reason is water stays for a long time inside the water tank. Mechanism and inside of water tank needs a good cleaning. Simply pour as much as vinegar is needed and let it stay in there while you move to clean other parts of your toilet.

However, make sure that you don’t flush your toilet water accidentally. Also, you don’t want to leave vinegar too long in the water tank because the acid might corrode the metal.

Step 2– Clean the Rim

After water tank, cleaning toilet rim would be perfect next step. Spray the vinegar over the rim, and under the toilet rim. Leaving toilet rim sitting for too long can leave our toilet in disgusting condition.

Step 3 – Clean the Toilet Bowl

When toilet rim is done, the next step would be to clean the toilet bowl. It might seem like an easy thing to do. However, make sure not to forget about the part which is above the water line. It can be tricky, but you just need to find a way to deal with it.

Step 4 – Pour the Vinegar Again in Toilet Bowl

After you have done everything, don’t even think about flushing the toilet water yet. It’s time to do the last final step. It would be pouring much vinegar into the toilet bowl. Then scrub the bowl under the water line. You might need to let vinegar some time to loosen the calcium. It might be built up around the edges of the water.

Step 5 – Cleaning Outside of The Toilet 

The final step would be giving a quick cleaning to your toilet from the outside. Then flush the toilet water.

After spraying the vinegar, make sure to give it a few minutes to soak all the dirt up before cleaning it up.

Conclusion

Cleaning of your toilet is a necessary thing everyone should do at least once a week. Commercial toilet cleaning products can be expensive, and they definitely run out too quickly.

Vinegar is an acid which is compared to any commercial toilet cleaning product on the market right now. And it’s one of the most affordable options out there.

It’s perfect for people who love cleaning their toilet. Especially clean without spending a lot of money on the cleaning products.

How often do you clean your toilet? Ever tried vinegar?

 

How to Clean The Toilet With Baking Soda

By

Cleaning The Toilet With Baking SodaHow to clean the toilet with baking soda is something everyone would like to know. Why spend money when it can be cheaper? Especially if you’re on a tight budget. Wondering how it’s done? Stay tuned and let me teach you how.

Commercial toilet cleaning products definitely don’t last long. And they can be a bit expensive. Especially if you are cleaning your toilet on a regular basis, as it should be done.

If you have never tried cleaning your toilet with homemade solutions, you should definitely try it. It doesn’t cost a lot, and they might be as effective as commercial toilet cleaning products.

Everything you need to know is right here in front of you, and you just need to take action.

Does Cleaning Toilet With Baking Soda Help?

Our minds are created to use the things that are made to be used in an exact way. Homemade way of toilet cleaning is as good as commercial toilet cleaning products. Yet people still spend a lot of money each year on commercial toilet cleaning products.

If you are questioning whether homemade toilet cleaning methods work, you should definitely try it and find out yourself. All I can say is that if they didn’t work, we wouldn’t be taking them from a generation to generation for such a long period of time throughout our history.

Baking soda won’t only help you to fight the dirt, germs, and stubborn stains. It’s also a natural and eco-friendly product that you could use safely in your home environment.

Also, baking soda is very affordable, non-toxic, and very friendly to the environment. On the other hand, commercial toilet cleaning products are made from chemicals, including bleach.

Toilet requires regular cleaning with at least once per week. If you add such harmful chemicals in your life that often, you might experience the dangerous side effects.

How Can Baking Soda Help Clean Your Toilet?

Baking soda is a very affordable ingredient, which is 100% natural and free of chemicals. Therefore, baking soda is way safer and eco-friendly than any commercial toilet cleaning product is. Yet, it’s as efficient as any commercial toilet cleaning product would be.

Baking soda can help clean your toilet because it’s versatile and can be used in any way possible. It’s very good at cleaning and removing bacteria, germs, fighting stubborn stains. Even bringing the shine back to your toilet.

Also, baking soda doesn’t have such a strong scent like vinegar does. It is perfect for everyone who has been delaying cleaning their toilets with their own homemade cleaning products.

Baking soda can help clean your toilet in many different ways as well. It can be combined with vinegar for even the better results. Mixing baking soda with hydrogen peroxide spray isn’t a bad idea either.

The most popular way baking soda helps to clean your toilet would be the baking soda bombs. Baking soda bomb is when you mix two cups of baking with Epsom salt. On top of that you add up to 9 spoons of liquid dish detergent. Let it dry overnight. You will have a killer homemade toilet cleaning combination in the morning.

How to Clean The Toilet With Baking Soda?

There’s no important order you should clean your toilet in. It’s only important that you don’t skip any part, and that you don’t rush the process.

Baking soda is good to fight stubborn water stains in a natural way. In other hand, commercial toilet cleaning products that include chemicals can damage the top layer of the toilet.

Keep in mind that even toilets with stainless coating can get stains over a longer period of time.

First Step: Start cleaning with the toilet Bowl

I would recommend you to start with the toilet bowl. You will do that by simply sprinkling baking soda into your toilet and leaving it in. After that, feel free to moisten it either with water or vinegar before you scrub it off. However, don’t forget about the unreachable part where the water comes from the tank. It might be hard to do with baking soda; however, I suggest you use anything that will make it easier. When above the water line bowl is cleaned, make sure to scrub below the waterline as well. A lot of calcium is located at the edges of the water line.

Second Step: Cleaning the water tank

When cleaning the water tank, simply pour the baking soda into the water tank and leave it in. Baking soda will take some time. But it will break down all the calcium, lime, and all other minerals that can be found in the tap water. Give baking soda time before you flush the water. After flushing the water, give water tank a good scrub inside. But make sure that you are careful about the mechanism. You can repeat the step as many times needed. Baking soda isn’t acid like vinegar is, so you can leave baking soda in as long as you think is necessary.

Third Step: Toilet Rim

When you have done these two steps, it’s important to clean the toilet rim as well. We all know what happens when you leave your toilet rim down for a longer period of time. Luckily, baking soda is good to fight the disgusting bacteria and germs under there as well. Give it a nice clean before taking the last step.

Last Step: Clean outside of the toilet

The last thing would be to clean the outside of your toilet. Human waste hardly reaches there. However, you would be surprised to know that how many bacteria can be found there as well.

Conclusion

There is no excuse for not cleaning your toilet. It should be done at least once a week.

Commercial products are good enough for cleaning. However, you can always find yourself in situation when you ran out of the product. But now you have a very cheap way of cleaning your toilet which will meet everyone’s budget. There is no cheaper solution than this.

If you are looking to achieve the best results, mixing baking soda with vinegar is also one of the popular options.

What do you use to clean your toilet? How much do you spend on toilet cleaning products itself?